AVAILABLE TO ORDER
The TwinStomp Booster uses a modified version of the Mosfet Booster circuit developed by Jack Orman www.muzique.com. This circuit is widely known as the best for providing clean boost without colouring your guitar's basic tone. It is not an overdrive circuit because it does not produce artificial overdrive, however the gain from this circuit is able to push valve amplifiers into creamy / crunchy overdrive sounds and is therefore a must for valve amplifier owners.
The modifications allow for the provision of 2 independent boost output settings and for the power source line to be switched. The adjustable gain boost channels are designed to give x1 to x5 Voltage Gain (0dB - 10db) on Channel 1 and x2 to x13 Voltage Gain (6dB - 22.5dB) on Channel 2 as standard.
TwinStomp BOOSTER only uses the highest specification components purchased from reliable sources and is made entirely in the UK.
All connections are hand wired. There are no crimp or push-on connectors used in the construction. Inter PCB wiring is supported by threading through clearance holes in the PCBs to ensure that the connections are not under any strain at any time. Wiring to switches and sockets is held firmly by cable ties. Lead free solder is used throughout and is specified on components.
Because all TwinStomp effects pedals sound slightly better when battery operated, with less stage clutter, Twinstomp have developed a unique method of accessing the 9 volt PP3 battery. On their effects your battery can be replaced without removing the base of the case and without requiring any tools. This means that your TwinStomp pedal can be permanently fixed to a pedal board and you still have access to the battery.
Circuits are fully tested twice, before and after assembly into the case. Every pedal has a full functional test into a quality valve amplifier in addition to wave form testing using a Function Generator, Oscilloscope and Digital Voltmeter.
A British pedal that Creative Tools are proud to support.